DMX LED Controllers
Madrix control window
Madrix NEO
Madrix NEO - music makes the light
The MADRIX NEO makes it much easier to work with any DMX-based LED lighting installation thanks to its highly professional qualities and MADRIX.
• DMX-IN/OUT with 5-pin NEUTRIK XLR Port
The NEO hardware allows you to send or receive data via MADRIX software using 512 DMX channels.
A Male to Male 3-pin or 5-pin XLR Gender Changer is required for DMX-IN.
Master LED Controller RGBW NV-MC4-1
Wall mounted RGB/W DMX512 controller
- Touch sensitive
- Glass interface(White & Black)
- Control 4 zones synchronously and separately
- Save up to 4 color in each zone
Master LED Controller RGBW NV-MC4-3RF
RGBW Touch DMX512 Wall Control Panel
- 3 zones
- Sensitive Glass Touch Panel
- DMX512 Signal
- White&black
- North American size
- Comparable with RF remote control RM4-3 ( sold separately )
LED Master DMX Dimmer NV-DIM-T4-3
4 zones Master DMX512 dimmer
- Backlight
- Glass interface(White & Black)
- Touch sensitive
- Adjust brightness
LED master Dimmer 0-10V NV-DIM-1-10
Wall mounted Master LED dimmer 0-10V
- NV-DIM-R1-D is DMX Wal l Mounted Rotary Dimmer switch with 256 levels logarithmic dimming from 1-100%.
- By DMX Signal, it works with DMX Decoders
- Simple and friendly use for dimming and switching ON/OFF for 1zone control led.
LED Remote controller RF NV-RM4-3
RF wireless LED remote controller
- NV-RM4-3 remote controller has 4 different zones.
- The remote controller can save up to 3 colors or 3 modes into corresponding buttons (S1,S2,S3) for each zone.
- You can choose any color through color wheel. you can set the system as RGB or RGBW channel output.
LED DMX Decoder NV-DD4x5A-DIN
Easy 512 DMX decoder 4x5Amp
- Standard DMX512 compliant control interface, enable to set the DMX address freely. And show address Via digital numueric display.
- Three-channel/ four-channel output selectable.
- Two types available(Constant Voltage, Constant Current),suitable for different LED lamps.
- To work with power repeater to expand output power unlimitedly.
DMX decoder 4x5Amp 12-36V
DMX Decoder 3/4 ch x 5Amp
Model : NV-DD4x5A
- Standard DMX512 compliant control interface, enable to set the DMX address freely.
- And show address Via digital numueric display.
- Three-channel/ four-channel output selectable.
- Two types available(Constant Voltage, Constant Current),suitable for different LED lamps.
- To work with power repeater to expand output power unlimitedly
LED Decoder 0-10V NV-D4x5A-10
LED Dimmer decoder 0-10V 4x5Amp
- With 1 Channel 0/1-10V signal Input, 4 Channels PWM Output
- Analog dim driver, receive standard 1-10V dim signal input
- 0-100% dimming range via logarithmic characteristic , perfect for human's vision
LED Single Ch decoder 0-10V NV-D1x8A-10
LED Dimmer decoder 0-10V 1x8Amp
- With 1 Channel 0/1-10V signal Input, 1 Channel PWM Output
- Analog dim driver, receive standard 1-10V dim signal input
- 0-100% dimming range via logarithmic characteristic , perfect for human's vision
LED DMX Decoder 4x8Amp NV-DD4x8A
DMX 512 Decoder 4x8Amp
- RJ 45 port, could be connected to WIFI & bluetooth signal , could be RF Remote control led or IOS/Android programmed by WIFI.
- Addressable. Address can be freely set through the digital display which is very intuitive and easy to use.
- three-channel / four-channel output is selectable, per channel maximum ouput can be 8A
- work with the power expander can be infinitely ampl ified output power.
